BUILDING relationships • innovation • excellence
Integrated Building Systems
Home > Projects > Integrated Building Systems

Projects include heavy and light manufacturing structures, warehouse structures, maintenance facilities, and aircraft hangars.

CloundNine Hangars & Offices
Camarillo, CA

Four new 25,000 sq. ft. hangars each with 5,000 sq. ft. of related maintenance shop and office space. Project includes all new site work, aircraft tarmac areas and runway improvements.

Under Construction
Hangar Office Project
Van Nuys, CA

New construction of a 48,500 sq. ft. hangar, 280 ft. clearspan, 55 ft. clear height, with an adjacent 5,800 sq. ft. steel framed office. This project also includes 171,000 sq. ft. of concrete tarmac and 25,000 sq. ft. of parking lot improvements.

Under Construction

Two 31,000 sq. ft. PEMB hangars each with a 4,000 sq. ft. single story office/shop space. Hangar improvements include approximately 45,000 sq. ft. of roof mounted solar panels. Site work includes approximately 45,000 sq. ft. of site improvements and 80,000 sq. ft. of aircraft ramp improvements.

Guardian Jet Center
Ontario, CA

A 28,000 square foot pre-engineered hangar building along with approximately 14,000 square feet of two story office space. Upgrade of approximately 20,000 square feet of aircraft taxiway and concrete ramp area, parking spaces and carports.


A one and two story office building totaling approximately 58,000 sq. ft. Includes open air patio/garden area on mezzanine level, six large skylight units and tow open wall assemblies covered by aircraft style bifold doors. Natural day lighting achieved with the use of translucent wall and roof panels, two color - exterior single skin PBR wall and roof panels.


16,626 sq. ft. of new warehouse building and canopy. A 1-story, Type III-B pre-engineered metal warehouse building including a 2nd floor of 1,671 sq. ft. and roof extension for exterior storage of 4,420 sq. ft. The 2nd floor and a portion of the area below houses 2,619 sq. ft. of accessory offices and related spaces.

Showbiz Studios
Van Nuys, CA

A 7,000 sq. ft. soundstage with a 40 ft. high clear grid iron level built within an existing one story warehouse building. 97 ft. x 93 ft. footprint with a 47 ft. high ridge line.


Structural steel framing, metal roof and floor decking systems for a 48,184 sq. ft. of single story Process Building, a 24,880 sq. ft. Administration and Learning Center and an 8,000 sq. ft. Chemical Storage Facility.


Hangar and Office located at the Van Nuys Airport. Hangar improvements total 37,800 sq. ft. with a 280'clear span structure. Office and shop improvements total approximately 8,150 sq. ft. Total of improvements are situated on a site of approximately 3 acres.


Two new hangars totaling 65,000 sq. ft. with related maintenance offices and a new 22,500 sq. ft. two story office building including new site work, tarmac area and runway access.


Hangar and office addition to the Atlantic LAX location. One 36,000 sq. ft. hangar with a clear span of approximately 215' and approximately 6,700 sq. ft. of office and support areas.

Pomona Valley Transfer Station
Pomona, CA

60,000 sq. ft. Material Recovery Facility (MRF), Concrete Tilt-up exterior walls with Butler MR-24 Roof System in Cool Solar White, roof walkway system. Engineered for roof mounted Photovoltaic System. LEED Silver project.

Landmark Aviation - San Diego International Airport
San Diego, CA

A 5-corporate aircraft hangar complex totaling 120,000 sq. ft. with clear span openings ranging from 160' to 230' and full floating hangar doors. A cool roof system includes accommodations for Photovoltaic System.

ADI ( Aerospace Dynamics International)
Santa Clarita, CA

90,000 sq. ft. single story manufacturing building including 6 overhead bridge cranes.

Bob Hope Airport - Regional Intermodal Transportation Center
Burbank, CA

A 20,000 sq. ft. pre-engineered Customer Service Building and a 190,000 sq. ft., Roof only, galvanized steel structure with a Butler MR-24 Roof System designed to support a future Photovoltaic Solar System.

Chevron Central Reliability Center
El Segundo, CA

90,000 sq. ft. single and 2-story integrated steel office building and cafeteria located at Chevron Products Company El Segundo Refinery.

Space Shuttle Endeavour Orbiter Holding Facility
Los Angeles, CA

New construction of a 17,400 sq. ft. by 66' tall Butler pre-engineered steel building to house the Space Shuttle Endeavour Orbiter at the California Science Center in Downtown Los Angeles.
Architect: Zimmer Gunsul Frasca (ZGF)

SBIA Freight Facility 676 Building
San Bernardino, CA

A 5,000 sq. ft. pre-engineered warehouse/freight building, including associated sitework and offices at the San Bernardino International Airport

McCoy / VNY
Beverly Hills, CA

A 2,201 sq. ft. pre-engineered metal maintenance facility

Million Air Hangar
San Bernardino, CA

A 28,000 sq. ft. hangar, 220’ clear span, 28’ high by 12’ leaf, full-floating door system. Adjoining spec office space and ground service equipment areas total approximately 4,500 sq. ft.

Landmark Aviation / TWC Aviation (Formerly Maguire Aviation)
Van Nuys, CA

A 45,000 sq ft. corporate hangar and 13,000 sq. ft. office building. This project won the 2008 Project of the Year Award from the Southern California Development Forum. This Butler Steel structure was designed to reflect the sky and stands out as a landmark at the Van Nuys Airport.

TWC Aviation Offices
Van Nuys, CA

A 13,000 sq. ft., two-story office build-out includes office, conference and food prep area

Martin Aviation
Santa Ana, CA

Retrofit and unification of approximately 30,000 sq. ft. of existing hangar/shop/office space built in 1970s and 80s with a 29,800 sq. ft. pre-engineered hangar and office building. This facility houses a private and notably rare collection of WW II aircraft. Features of the new construction include a 260 ft. clear span structure with a 28 ft. high hangar door comprised of ten full-floating glazed leaves that create a 220 ft. wide opening. A structurally supported observation walkway along one side overlooks the aircraft collection below. In addition, 2,400 sq. ft. of conventionally framed two-story offices were incorporated into the overall footprint. Butler Manufacturing supplied the custom-engineered structural system while the architectural horizontal rib metal wall panels were supplied from a local siding supplier.

Air 7 (Formerly Taxiway Alpha / Avant Air)
Camarillo, CA

Two 27,000 sq. ft., 190’ clear span hangars with a two-story, 13,000 sq. ft. office located between the hangars

Burbank Airport Corporate Hangar
Burbank, CA

A 27,000 sq. ft. remodel of an existing aircraft hangar and a new 5,000 sq. ft. office and shop, including approximately three acres of new site improvements and ramp access

Mercury Aviation Hangar
Burbank, CA

Three corporate hangars and office building totaling 76,000 sq. ft.

Media Aviation Hangar
Burbank, CA

A 16,000 sq. ft., FBO facility in addition to eight corporate hangars totaling 194,000 sq. ft. completed in two phases and designed by DeRevere & Associates

Laidlaw Transit Facility
Commerce, CA

14,000 sq. ft. Bus Maintenance and 4,000 sq. ft. Office

LSC Hangar
Van Nuys, CA

14,000 sq. ft. corporate hangar and 6,000 sq. ft. two-story office building

Bethany Baptist Church
Granada Hills, CA

15,000 sq. ft., one-story, pre-engineered steel sanctuary building

St. Paul Baptist Church, Joel John Academy
Los Angeles, CA

12,000 sq. ft. pre-engineered steel activity center and gymnasium building