BUILDING relationships • innovation • excellence
Aviation
Home > Projects > Aviation

Projects include aircraft hangars, fixed-base operations, terminals, freight buildings, and U.S. Customs facilities.

AEROLEASE ASSOCIATES - HANGAR 4
VAN NUYS, CA

Hangar and Office located at the Van Nuys Airport. Hangar improvements total 37,800 sq. ft. with a 280'clear span structure. Office and shop improvements total approximately 8,150 sq. ft. Total of improvements are situated on a site of approximately 3 acres.

CLAY LACY AVIATION
VAN NUYS, CA

Two new hangars totaling 65,000 sq. ft. with related maintenance offices and a new 22,500 sq. ft. two story office building including new site work, tarmac area and runway access.

Atlantic Aviation LAX
Los Angeles, CA

Hangar and office addition to the Atlantic LAX location. One 36,000 sq. ft. hangar with a clear span of approximately 215' and approximately 6,700 sq. ft. of office and support areas.

Landmark Aviation - San Diego International Airport
San Diego, CA

A 5-corporate aircraft hangar complex totaling 120,000 sq. ft. with clear span openings ranging from 160' to 230' and full floating hangar doors. A cool roof system includes accommodations for Photovoltaic System.

Bob Hope Airport - Regional Intermodal Transportation Center
Burbank, CA

A 20,000 sq. ft. pre-engineered Customer Service Building and a 190,000 sq. ft. , roof only, galvanized steel structure with a Butler MR-24 Roof System designed to support a future Photovoltaic Solar System.

Space Shuttle Endeavour Orbiter Holding Facility
Los Angeles, CA

New construction of a 17,400 sq. ft. by 66' tall Butler pre-engineered steel building to house the Space Shuttle Endeavour Orbiter at the California Science Center in Downtown Los Angeles.

NetJets
Van Nuys, CA

An 9,700 sq. ft., Type V, terminal facility with lobby, commercial kitchen, offices, pilot's lounge, and line service, including 100,000 sq. ft. of concrete ramp and related site improvements.

SBIA Freight Facility 676 Building
San Bernardino, CA

A 5,000 sq. ft. pre-engineered warehouse/freight building, including associated sitework and offices at the San Bernardino International Airport

Million Air FBO and Hangar
Gulfport, MS

FBO, hangar and maintenance facility at the Gulfport Biloxi International Airport. Incorporates a 17,000 sq. ft. FBO terminal building (including conference rooms, theatre, and gym)a 25,000 sq. ft. hangar, and a 3,000 sq. ft. U.S. Customs point-of-entry facility

Luxivair (Formerly Million Air FBO)
San Bernardino, CA

Three buildings with a total of over 58,000 sq. ft., including a one and two-story 13,700 sq. ft. FBO/office building; a 35,600 sq. ft. hangar and office building; and a two-story 7,300 sq. ft. office building

Million Air Hangar
San Bernardino, CA

A 28,000 sq. ft. hangar, 220’ clear span, 28’ – 12 leaf, full-floating door system. Adjoining spec office space and ground service equipment areas total approximately 4,500 sq. ft.

Landmark Aviation / TWC Aviation (Formerly Maguire Aviation)
Van Nuys, CA

A 45,000 sq ft. corporate hangar and 13,000 sq. ft. office building. This project won the 2008 Project of the Year Award from the Southern California Development Forum. This Butler Steel structure was designed to reflect the sky and stands out as a landmark at the Van Nuys Airport.

Martin Aviation
Santa Ana, CA

Retrofit and unification of approximately 30,000 sq. ft. of existing hangar/shop/office space built in 1970s and 80s with a 29,800 sq. ft. pre-engineered hangar and office building. This facility houses a private and notably rare collection of WW II aircraft. Features of the new construction include a 260 ft. clear span structure with a 28 ft. high hangar door comprised of ten full-floating glazed leaves that create a 220 ft. wide opening. A structurally supported observation walkway along one side overlooks the aircraft collection below. In addition, 2,400 sq. ft. of conventionally framed two-story offices were incorporated into the overall footprint. Butler Manufacturing supplied the custom-engineered structural system while the architectural horizontal rib metal wall panels were supplied from a local siding supplier.

Air 7 (Formerly Taxiway Alpha / Avant Air)
Camarillo, CA

Two 27,000 sq. ft., 190’ clear span hangars with a two-story, 13,000 sq. ft. office located between the hangars

Burbank Airport Corporate Hangar
Burbank, CA

A 27,000 sq. ft. remodel of an existing aircraft hangar and a new 5,000 sq. ft. office and shop, including approximately three acres of new site improvements and ramp access

Mercury Aviation Terminal
Burbank, CA

A new 13,000 sq. ft. aircraft terminal, FBO, lounge, conference and maintenance area

Mercury Aviation Hangar
Burbank, CA

Three corporate hangars and office building totaling 76,000 sq. ft.

Media Aviation Hangar & FBO
Burbank, CA

A 16,000 sq. ft., FBO facility in addition to eight corporate hangars totaling 194,000 sq. ft. completed in two phases and designed by DeRevere & Associates

LSC Hangar
Van Nuys, CA

14,000 sq. ft. corporate hangar and 6,000 sq. ft. two-story office building